A clogged printhead is extremely frustrating. Dirt, debris, and dried ink clog the tiny holes due to which the prints are streaked with white lines, faded, or with text missing. Your inkjet is just partially operational. Some inkjet printers are more prone to clogging than others. However, clogged printheads are unavoidable regardless of the type of inkjet printer you use.
What is Printhead?
The printhead is a printer component that aids in the transfer of ink onto the page. This will be accomplished by hosing small droplets of ink through a variety of printer nozzles to create the required print. If one of these nozzles becomes clogged, your prints will seem pale or smeared.
Ink will dry out and cause issues with the appearance of your prints regardless of whether you use a compatible, reusable, or branded cartridge. If you ignore this, your printer will eventually break down and will need to be replaced.
You can buy authentic printer supplies from Need More Ink. They supply anywhere in the US. The entire HP ink and toner cartridge are available at a discounted deal on their website. Currently, they are running heavy discounts on ink and printers which are huge benefits for those who have been using compatible inks cartridges due to budget.
How to Clean HP Printhead?
Automatic
- To improve the quality of the printout, you should run a cleaning method.
- The cleaning function is contained within each HP printer model’s software system and is occasionally found below the “printer maintenance” portion of your printer’s menu.
- It will take around 1-2 minutes to clean the printheads, and they will use some ink throughout the cleaning process.
- After you’ve finished cleaning, print a test sheet to ensure that the print quality is correct. You’ll be able to continue printing if the print results appear good.
- If the colors aren’t appropriate, you’ll have to repeat the cleaning method for 2-4 times until the print quality improves.
- If you’re still having trouble getting good prints after several cleaning, then contact HP customer support or check their manual to find the error.
- You don’t need to run the cleaning procedure very often because it will exhaust the ink in your cartridges.
Manual
- Place a dry paper towel into the plastic container.
- Pour at least 2 inches of water on top of the towel to completely submerge it.
- Remove all of the ink cartridges from the printer after opening it.
- While you continue to clean the printheads, set the cartridges aside on a separate towel. The cartridges should face up on the towel.
- Remove the printhead from the cartridge by lifting the gray latch behind the cartridge.
- Remove the printhead from the machine by pulling it up.
- Damp the lint-free towel in warm water and wipe extra ink on the printhead.
- Place the printhead into the container that contains soaked paper towels. Ensure that the nozzle doesn’t break while placing and it should point down.
- Allow the printhead to soak for around 10 minutes. Then remove it from the apparatus and dry it for 15 minutes on a dry cloth.
- In the printer, reinstall the printhead lock it, and reinstall the cartridges to conduct the cleanup procedure on the system.
Before you start cleaning, double-check the nozzle to be sure of the source of the problem. Cleaning the printhead is only one of the things you can do to ensure smooth operation. It’s also one of the most beneficial things you can do at home or work.